1. Voltage balancer for Li-polymer battery inside: B5 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lipo battery for cell balancing.
2. Maximum safety:
A. Delta-peak sensitivity: The automatic charge termination program works on the principle of the Delta-peak voltage detection.
B. Capacity limit: The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
C:Processing time limit: You can also restrain the maximum process time to prevent from any possible defect.
D. Input power monitor: To protec the car battery using as input power from being damaged the voltage of it always monitored. If it drops blew the lower limit the process will be ended automatically.
3. High-power and high-performance circuit: B5 employs the circuit that has maximum output power of 50W. As a result it can charge up to 14 cells of NiCd/NiMh and 5 series of Li-Poly batteries with maximum current of 5.0A. Both of these functions are used to protect your battery far away from damage. IMAXB5can make sure your battery work effectively and maximize the life-span of your battery at the same time. |
