| Feature |
| Balsa
and plywood construction.
Two piece
all wood polyhedral wing design gives outstanding thermal performance.
Factory
applied adhesive-backed plastic covering.
The wings,
horizontal stabilizer and rudder have outstanding craftsmanship applied
at the ends.
Easily accessible
radio compartment.
ABS cowl.
ABS canopy.
Mabuchi
540 motor Graupner plastic folding 8x4-5 propeller, 1-1/2" (38mm)
gray plastic spinner.
Ready to
fly in just a few hours. |
| |
 |
| |
| Description |
The
Omei 2000 EP 75" ARF is a great flying EP glider. Give it a toss, fly
it into the sky, and fly forever. The kit includes a white fiberglass fuselage.
The wings are built up and covered with matching white covering. The underside
of the wings and tail section is red for high visibility up high. All control
surfaces have beveled leading edges and the control horn mounts are preinstalled.
The kit includes full color decals. Spinner, folding prop, and 540 class
motor are included. This model has ailerons and elevator.
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
spinner, wood servo tray, aluminum wing joiner, all hardware, propeller,
motor and photo-illustrated English instructions.
REQUIRES: Radio:
3 channel with standard servos (mini servos may be used for lighter weight).
Auto cut-off or speed control. 6-cell flat battery with Tamiya connector
or a 7-cell will also fit and provide better climb performance. Battery
charger. Building supplies such as CA and epoxy glue, foam rubber padding,
Z-bend pliers, scissors, sandpaper, hobby knife, ruler, masking tape, rubbing
alcohol, paper towels, waxed paper, 90 degree triangle, light viscosity
oil, pen or pencil. |
| |
| Specifcation |
Wingspan
75 inches
Length 45.5 inches
All built Fiberglass Fuse
Engine size: 540 Class (Included)
Weight 2.9-3.1 lbs
Wing Area is 449.5 in²
RG-15 Modify
Radio: 3-Ch Transmitter, 3 servos |
|
