CAPITOL Nitro Gas Radio Control RC Plane - ARF

There simple is no ARF available that will get you into the air faster than Megatech's Nitro SkyLinerT and Nitro Capitol FlyerT. Both of these models feature the Simple-7T System. This system uses seven butterfly nuts to complete assembly. Just add a 4-channel radio and .40 to .46 sized engine and you're done! All control linkage cuts and installation, fuel tank installation, and all servo cutouts are done at the factory. With Megatech's SureMountT motor mounting system even the engine is installed in minutes. This trainer grows right along with your flying skills. Features Semi-Symmetrical wing and your choice of 2 included dihedral brace options

• Length : 47 inches
  
• Wingspan: 17-20 Oz. per square foot
  
• Weight: 5-6 lbs (depending on equipment used)
  
• Functions: Ailerons, Elvator, Rudder and Throttle
  
• Requires: .- 40-.54 sized 2 stroke or .52-.60 size 4 stroke model airplane engine
  
• 4-Channel radio system with servos
  
• Fuel ( specific to engine requirements
  
• 4-way glow plug prop wrench
  
• Glow plug ignitor battery
  
• Starter

• All Balsa and plywood construction
  
• Nose Gear and linkages pre-mounted and adjusted
  
• Main Landing Gear attaches with only three wing nuts
  
• All hinges glued and screw-pinned for maximum security
  
• All servo and switch cutouts are made and pre-drilled
  
• SureFit motor mount provides ridged mounting in minutes for .40-.54 2 stroke or .52-.60 4 stroke sized engines
  
• Throttle Linkage is installed and cut to length
  
• Ultra Light WIng Loading 18-19 oz per sq. foot (depending on equipment used)
  
• Super Stable and Easy to Fly
  
• Aerobatic Semi-Symmetrical Airfoil